With the SAFETY-CLIP SYSTEM from Poly-clip System, your machines, the clips and the loops are perfectly matched to your product. This ensures the consistently high quality of your products, reduces machine wear and ensures that your investment retains its value.
Look at the advantages:
Clips from Poly-clip System are manufactured from pure aluminium or from selected alloys permitted within the food industry. For all clips, a consistent quality without variation in material hardness is guaranteed. Our clip manufacture is subject to a large number of the most rigorous, verifiable quality tests.
Poly-clip System supplies original clips exclusively on new spools. Used spools are shredded and melted down. The material is recycled and used externally in the non-food sector.
If you are required to demonstrate that all materials used in and on your products are harmless to health, that will not be a problem. With the barcode on the packaging, original clips are traceable to the source of the material.
Get the benefit of our know-how and experience - trust in Poly-clip System.
All clips from Poly-clip System are tested in accordance with LFGB/BedGgstV (German Food, Consumer Goods and Feed Code/German Consumer Goods Ordinance) and Regulation (EC) No. 1935/2004, EU Regulation No. 10/2011 and have been awarded the SGS INSTITUT FRESENIUS quality seal. Poly-clip System clip and loop manufacture is certified in accordance with ISO 9001:2015 and ISO 22000:2005. In addition, all production processes employed in the manufacture of Poly-clip System clips and loops satisfy the requirements laid down by Halal Certification Germany.
For automatic double-clippers in the FCA series and for automatic sealing/clipping machines in the TSCA series:
Intelligent clips – 'the clip can communicate'
The R-ID Clip offers the possibility of increased automation of the clipping process. It utilises RFID technology, thus allowing it to communicate directly with the clipping machine. The special geometry of this clip means that, depending of course on the product involved, bacteria-proof clip closure is possible, whether plastic casings or aluminium laminated films are being used.
The modified internal profile of the clip results in an even greater holding force on clip closure. And thanks to the round contour of the open clip and the oval contour of the closed clip, a highly uniform pressure is applied to the casing almost throughout the clip closure area, thus improving clip safety and tightness. The clipping punch and die, which are precisely tailored to the clip, also contribute to an extremely uniform closure pattern that inevitably leads to a consistently tight and visually clean clip closure. The R-ID Clip series caters for the narrowest dimensional tolerances and ensures safe and reliable sausage closure right from the smallest 25 g chubs up to calibres of 160 mm.
The use of the R-ID Clip can prevent unscheduled machine downtime caused by incorrect clips or dies. With the aid of integrated RFID (radio frequency identification) technology and individual values stored in the product parameters, it is now possible to establish whether specific clip and die sizes actually match the product concerned. The automatic clipper also checks whether the die in particular is suited to the clip. In this way, both faulty production start and time and material losses can be prevented.
For automatic double-clippers in the FCA series and for automatic sealing/clipping machines in the TSCA series:
For many single- and double-clippers as well as automatic double-clippers in the PDC/PDC-A series and ICA series:
clipser, the special clip for bags - a reliable closure
The clip type clipser in combination with a bench clipper makes it practical and easy to close sacks, tubes, nets and bags.
For special single-clippers in the Easy Clip Line® and SCD series as well as double-clippers in the DCD series:
In addition, Poly-clip System offers the netting clip N3. This plastic clip is trident-shaped and was developed for particularly secure netting closure. The clip cannot be pulled from the netting.
For 'non-Poly-clip' single- and double-clip machines:
Our machines, consumables and services meet the highest standards. This is promised not only by numerous certifications, but above all by our own claim: Excellence in Clipping. In this way, we guarantee you the reliability and dependability that you can expect for your production. We ship spare parts worldwide within the shortest possible time, quickly and without complications. If necessary, our technical service is on the spot via the fastest route.
