Intelligent Filler Clipper Interface

IFC

Solicitar producto

Marcar producto

Detalles

Folleto

Detalles

Fácil manejo y parametrización del producto para un inicio fiable de la producción
Menor desgaste mecánico debido a la superposición controlada de los ciclos de porcionado y grapado
Para las grapadoras dobles automáticas Poly-clip System con control PC “listas para IFC” y embutidoras Handtmann serie VF 800

Up to 10 % higher output due to digital data and signal exchange between automatic double-clipper and filler
Double-clipper and filler automatically synchronize
Interface link via Ethernet filler plug and filler cable X46
Automatic plausibility check of the settings for high process reliability
Weight correction by HCU or trend control is automatically adopted in the display of both machines
Increased process reliability, no blasted sausages
Line is controlled by three product parameters only: filling volume, filling speed and filling caliber
Easy handling; product parameter's can be entered at the double-clipper's SAFETY TOUCH
Operator controls the output with only one parameter – the filler start timing – the speed of the clipping machine is automatically adjusted
Due to the recipe in SAFETY TOUCH control (also HCU via filler) the clipping machine is integrated in the customer's network
Easy and quick adjustment for product change; the adaption is carried out simultaneously and synchronized between double-clipper and filler
Record number resp. article number must be identical on both machines, product parameters are retrievable from both machine controls
Reliable and easy settings for new products – even for continuous mode
Reduced mechanical wear – the machine-friendly continuous mode is activated as soon as possible (depending on the product)
Reduced noise when continuous mode is activated
Continuous mode maximum caliber range with the FCA 120 up to 70 mm, with the FCA 160 up to 100 mm

The automatic double-clipper is connected mechanically and synchronized electrically to a filling machine. The communication of signals and data between double-clipper and vacuum filler is realized with only one cable, the Ethernet external device plug X46. In this product data is forwarded from the automatic clipper’s SAFETY TOUCH to the filler and checked. Thereafter, the calculated data (filling/portioning time) are returned from filler to clipping machine. The double-clipper calculates the basic data for a safe start, i.e. the portioning point is automatically determined according to the opening of the separator. This balancing is also possible with small calibres, which are produced at high speed, e.g. mini-portions. Control of the line takes place only on the three parameters filling quantity, filling speed and filling diameter. Parameters need to be entered and saved directly at the vacuum filler for special functions: Metal detector, variable weights, trend control through checkweigher, HCU, line-mode/remote control, preselect of volume/weight adjustment and for monitoring functions. When using the IFC interface the clipping machine and vacuum filler work as often as possible in the low-wear and thus machine-conserving continuous mode. Automation and ease of handling guarantee higher product output and cost savings and thus the maximum efficient use of machinery.

Folleto

Folleto Descargar

La promesa de calidad de Poly-clip System

Nuestras máquinas, consumibles y servicios cumplen con los requisitos más altos. Esto no solo lo prometen numerosas certificaciones, sino sobre todo nuestro propio reclamo: «excellence in clipping». Así le garantizamos la fiabilidad y la seguridad que puede esperar para su producción. Enviamos las piezas de repuesto a todo el mundo en el menor tiempo posible, de manera rápida y sin complicaciones. En caso necesario, nuestro servicio técnico estará a su lado lo más rápido posible.

Show more ... Show less ...

Más información